electronics.alternatezone.com Electronics related projects, information, and
resources.
How
to set the VCG-01
How to set the Time Date & Message :
Press the MODE button to enter edit mode. A cursor will be displayed over
the first character.
Press the MODE button to move the cursor right by one character at any time.
(If the cursor reaches the end of the display line it will wrap back around
to the first character)
At the desired cursor location press the SET button to increment the character
at that location.
To exit the edit mode and store the new settings, press and hold down the
MODE button while simultaneously pressing the SET button. The cursor will
then disappear and normal operation will return.
NOTES :
Buttons must be pressed for at least half a second to be recognised.
The time and date are not updated in edit mode.
At first use (or after changing the backup battery) the display may not
update correctly in normal mode. In this situation you must enter EDIT mode
and set the correct time/date before the clock will start.